Adaptive Structures and Additive Technologies for Defensive Missiles
Nur Fatin Ashiqin Ahmad Ridzwan （ Department of Mechanical and Aerospace Engineering, Kulliyyah of Engineering, International Islamic University Malaysia, 53100 Gombak, Kuala Lumpur, Malaysia ）
Wan Luqman Hakim Wan A Hamid （ Department of Mechanical and Aerospace Engineering, Kulliyyah of Engineering, International Islamic University Malaysia, 53100 Gombak, Kuala Lumpur, Malaysia ）
https://doi.org/10.37155/2717-526X-81-71982Abstract
The rapid evolution of modern missile threats, particularly in the hypersonic regime, has driven the need for highly integrated defensive missile systems capable of operating autonomously and reliably under extreme aerodynamic, thermal, and structural conditions. This review presents a comprehensive examination of adaptive and additive structures technology for defensive missiles, emphasizing the interdependent roles of aerodynamics, structural optimization, guidance and control, materials, and additive manufacturing. Missile classifications based on trajectory, function, and geometry are first reviewed to establish the operational context, followed by an in-depth discussion of aerodynamic and structural optimization strategies, including noncircular forebody designs, folding arc-wing configurations, aeroelastic effects, and nose cone trade-offs in hypersonic flow regimes. The review further analyzes advanced adaptive guidance and control architectures, highlighting the limitations of conventional reactive laws and the growing importance of nonlinear adaptive, vision-based, and AI-assisted guidance systems for intercepting highly maneuverable targets. Material considerations for hypersonic environments are discussed, with particular focus on carbon–carbon composites, ultra-high temperature ceramics, and honeycomb sandwich structures that balance thermal resistance, structural integrity, and weight efficiency. Finally, the strategic role of additive manufacturing is evaluated, demonstrating its impact on rapid prototyping, modular hypersonic testing infrastructure, and the fabrication of mission-critical components with reduced cost and lead time. Overall, this review underscores that future defensive missile development requires a tightly coupled, multidisciplinary systems approach, where aerodynamic efficiency, structural resilience, intelligent guidance, and advanced manufacturing technologies are co-optimized to meet the demands of next-generation hypersonic defense systems.
Keywords
Defensive missiles; Adaptive structures and controls; Additive technologiesFull Text
PDFReferences
[2] Cho, H. S. (2025). Design and analysis of a modular additively manufactured axisymmetric Mach 5+ hypersonic wind tunnel [Master’s thesis, Naval Postgraduate School]. NPS Archive: Calhoun.
[3] Cui, K., & Yang, G. (2010). Shape optimization for hypersonic arc-wing missiles. Journal of Aircraft, 47(4), 1414–1426. https://doi.org/10.2514/1.45882
[4] Davis, R. A., Elrod, S. D., & Lovell, D. T. (1974). Titanium honeycomb structure (NASA Technical Report No. N74-30926). National Aeronautics and Space Administration. https://ntrs.nasa.gov/citations/19740022813
[5] Herath, C. L. (2023). Hypersonic Missile Technology: A Comprehensive Analysis. International Journal of Research in Engineering and Science, 11(1).
[6] Huang, C., Liu, W., & Yang, G. (2017). Numerical studies of static aeroelastic effects on grid fin aerodynamic performances. Chinese Journal of Aeronautics, 30(4), 1300–1314. https://doi.org/10.1016/j.cja.2017.04.013
[7] Kalvinkar, M., Jacob, K., Reddy, P., & R, K. (2024). Hypersonic High Speed Strike Weapons: Design, Research and Development. Acceleron Aerospace Journal (AAJ), 3-5.
[8] Khan, M. A. H., & Rao, T. A. (2018). Aerodynamic and Structural Analysis of a Land Attack Cruise Missile. International Journal of Management, Technology And Engineering, 8(12).
[9] Mehta, S. S., MacKunis, W., & Curtis, J. W. (2011). Adaptive vision-based missile guidance in the presence of evasive target maneuvers. IFAC Proceedings Volumes, 44(1), 5471–5476. https://doi.org/10.3182/20110828-6-IT-1002.01257
[10] Olson, N., Boghozian, T., Sidor, A., Larsen, G., Bouslog, S., & Venkatapathy, E. (2023, August 13–17). Development of additive manufacturing technologies for 3D printing of spacecraft heat shields [Conference presentation]. ACS Fall 2023: Poly, San Francisco, CA, United States.
[11] Orion_int. (2021, August 2). Demystifying the DF-100: A deeper look at China’s mysterious cruise missile. Overt Defense. https://www.overtdefense.com/2021/08/02/demystifying-the-df-100-a-deeper-look-at-chinas-mysterious-cruise-missile/
[12] Peters, A. B., Zhang, D., Chen, S., Ott, C., Oses, C., Curtarolo, S., McCue, I., & Pollock, T. M. (2024). Materials design for hypersonics. Nature Communications, 15(1), Article 3433. https://doi.org/10.1038/s41467-024-46753-3
[13] Rawal, S., Brantley, J., & Karabudak, N. (2013). Additive manufacturing of Ti-6Al-4V alloy components for spacecraft applications. In Proceedings of the 6th International Conference on Recent Advances in Space Technologies (RAST) (pp. 5–11). IEEE.
[14] Shetty, S., Nagarkar, K., Khan, S. A., Aabid, A., & Baig, M. (2025). Analysis of flow characteristics around sharp, blunt, and bulb-shaped missile nose geometries. International Journal of Thermofluids, 28, Article 101321. https://doi.org/10.1016/j.ijft.2025.101321
[15] SOFREP. (2024, June 4). Kh-47M2 Kinzhal: An Air-Launched Hypersonic Missile. https://sofrep.com/news/kh-47m2-kinzhal-an-air-launched-hypersonic-missile/
[16] Ukirde, K. K., Pawar, S., Rahane, D., Sagar, B., & Shinde, T. (2023). Aerodynamic study of various fins for missile body. International Journal for Research in Applied Science & Engineering Technology (IJRASET), 11(2). https://doi.org/10.22214/ijraset.2023.49235
[17] Wan A Hamid, W. L. H., Shaik Dawood, M. S. I., & Aminanda, Y. (2025). Symmetrical finite element model for out-of-plane crushing of Nomex honeycomb structure. Advanced Materials Science and Technology, 7(2). Omniscient Pte. Ltd.
[18] Yusuf, S. M., Cutler, S., & Gao, N. (2019). Review: The impact of metal additive manufacturing on the aerospace industry. Metals, 9(12), Article 1286. https://doi.org/10.3390/met9121286
Copyright © 2026 Nur Fatin Ashiqin Ahmad Ridzwan, Wan Luqman Hakim Wan A Hamid
Publishing time:2026-02-06
This work is licensed under a Creative Commons Attribution 4.0 International License